Be Right Back, Uninstalling
Low End Rig .ini Settings - Printable Version

+- Be Right Back, Uninstalling (https://www.brbuninstalling.com)
+-- Forum: Games (https://www.brbuninstalling.com/forumdisplay.php?fid=50)
+--- Forum: Planetside (https://www.brbuninstalling.com/forumdisplay.php?fid=65)
+--- Thread: Low End Rig .ini Settings (/showthread.php?tid=13517)

Pages: 1 2

Low End Rig .ini Settings - Kor - 11-29-2012

After tonight's shitfest in the Tech Plant, I started digging around for ini settings that actually benefited rigs as old as mine(6 yrs).

I found it.

[Display]
    FullscreenRefresh=0
    Maximized=1
    RenderQuality=0.500000
    FullscreenWidth=1920
    FullscreenHeight=1080
    WindowedWidth=1920
    WindowedHeight=1080
    Mode=Fullscreen
    FullscreenMode=Fullscreen
   
    [Rendering]
    GraphicsQuality=1
    TextureQuality=1
    ShadowQuality=0
    RenderDistance=1000
    Gamma=0.000000
    MaximumFPS=1000
    UseLod0a=0
    OverallQuality=-1
    LightingQuality=0
    EffectsQuality=3
    TerrainQuality=3
    FloraQuality=0
    ModelQuality=3
    VerticalFOV=74
    ParticleLOD=2
    ParticleDistanceScale=0.650000
    FogShadowsEnable=0
    MotionBlur=0
    VSync=0
             
    [Terrain]
    RenderFlora=Off

Render quality down to 50% is offset by actually be able to use the better quality textures. No one cares about jaggy polys when there's no mistaking a target at 100m.

Re: Low End Rig .ini Settings - Didzo - 11-29-2012

TextureQuality should be set to 3. That's the low setting, oddly enough.

I found this thread that seems to be designed for making PS2 somewhat playable.

Seems legit enough.

Re: Low End Rig .ini Settings - grin - 11-29-2012

The following settings can be set to 0 for possibly better performance. They appear to be classed below "low" when in game. These settings are actually in the thread you link... Big Grin
    EffectsQuality
    TerrainQuality
    ModelQuality

    TextureQuality can be set to 4 for even lower settings than "low"
  ParticleLOD can be set to -1 for lower than "low" settings.

The biggest effect I had was when I set ShadowQuality to 0. I got about 10 more fps with that.
   

Re: Low End Rig .ini Settings - at0m - 11-29-2012

I just wish there was a render distance slider

Re: Low End Rig .ini Settings - Kor - 11-29-2012

(11-29-2012, 11:48 AM)at0m link Wrote: I just wish there was a render distance slider

So does everyone else, but dat culling.

Re: Low End Rig .ini Settings - at0m - 11-29-2012

(11-29-2012, 11:55 AM)Kor link Wrote: [quote author=at0m link=topic=6642.msg257621#msg257621 date=1354207704]
I just wish there was a render distance slider

So does everyone else, but dat culling.
[/quote]In PS1 you could disable LOD, because at range most models were reduced to stick figure gingerbread men that wobbled as they walked. Complete culling like they're doing just makes the game feel a lot less epic than it is.

Re: Low End Rig .ini Settings - Kor - 11-29-2012

(11-29-2012, 11:56 AM)at0m link Wrote: [quote author=Kor link=topic=6642.msg257623#msg257623 date=1354208131]
[quote author=at0m link=topic=6642.msg257621#msg257621 date=1354207704]
I just wish there was a render distance slider

So does everyone else, but dat culling.
[/quote]In PS1 you could disable LOD, because at range most models were reduced to stick figure gingerbread men that wobbled as they walked. Complete culling like they're doing just makes the game feel a lot less epic than it is.
[/quote]

Perspective: Playing Warhammer a while back. When they let everyone render 300-500 people in Tier 3 or 4 battles, grinding all hardware, including the servers to a halt. I believe culling is a short term solution deployed for the long term :p

Re: Low End Rig .ini Settings - Eschatos - 11-30-2012

Finally tried out the release client with these settings. I get 60 fps when no one's around, but in any actual fight it's still going down to the 10-15 range.

Re: Low End Rig .ini Settings - Didzo - 12-01-2012

[Display]
FullscreenRefresh=0
Maximized=0
FullscreenWidth=1920
FullscreenHeight=1080
WindowedWidth=1920
WindowedHeight=1080
RenderQuality=1.000000
Mode=Fullscreen
FullscreenMode=Fullscreen

[Rendering]
GraphicsQuality=1
TextureQuality=3
ShadowQuality=0
RenderDistance=1000
Gamma=0.000000
MaximumFPS=250
UseLod0a=0
VSync=0
OverallQuality=-1
LightingQuality=0
FogShadowsEnable=0
EffectsQuality=1
TerrainQuality=0
FloraQuality=0
ModelQuality=1
ParticleLOD=1
MotionBlur=0
VerticalFOV=74

The settings I settled on.

Dropping the render quality below 1.0 makes the game look absolutely horrific to the point of being unplayable, regardless of the FPS increase.

Re: Low End Rig .ini Settings - Eschatos - 12-01-2012

Well I guess it's settled then.  See yall in six months when I can afford to build a new PC(hopefully).

Re: Low End Rig .ini Settings - Versus - 12-07-2012

what's the line for fullscreen windowed? game crashes if i alt tab out of regular fullscreen and steam overlay doesn't work ingame.

Re: Low End Rig .ini Settings - Gasman - 12-07-2012

A fix for some possible crashing issues, including what was plaguing myself.

http://forums.station.sony.com/ps2/index.php?threads/32-bit-os-users-work-around-for-constant-crashing-after-5-30-minutes-of-play.52443/

Re: Low End Rig .ini Settings - Kor - 12-28-2012

GpuPhysics=0

Add this line to your .ini. It stops all PhysX calculations still running, despite PhysX being otherwise "disabled" in the menus.

Added another 15 fps for me, allowed me to go from 0.5 render to 0.8, which makes the game not look like Vaseline is smeared all over my monitor playable.

Re: Low End Rig .ini Settings - KarthXLR - 12-28-2012

(12-28-2012, 09:31 PM)Kor link Wrote: GpuPhysics=0

Add this line to your .ini. It stops all PhysX calculations still running, despite PhysX being otherwise "disabled" in the menus.

Added another 15 fps for me, allowed me to go from 0.5 render to 0.8, which makes the game not look like Vaseline is smeared all over my monitor playable.
Does it affect ATI cards? As far as I'm aware they don't use physx.

Re: Low End Rig .ini Settings - Kor - 12-29-2012

Apparently it doubly affects ATI cards, although they are anecdotal reports.

Re: Low End Rig .ini Settings - KarthXLR - 12-30-2012

(12-29-2012, 01:11 AM)Kor link Wrote: Apparently it doubly affects ATI cards, although they are anecdotal reports.
Can't hurt to get rid of it then.


Re: Low End Rig .ini Settings - CaffeinePowered - 02-17-2013

I enabled physx, shit looks amazing

Re: Low End Rig .ini Settings - Chooly - 02-18-2013

These settings go in graphics.ini I'm assuming?

Re: Low End Rig .ini Settings - Kor - 02-18-2013

Useroptions.ini




Re: Low End Rig .ini Settings - Goffin - 02-18-2013

Honestly,  the smoke and mirrors will last about a week and then you'll be back to what a shitty game it is  lol.


Here's some physx in action.    I might just stay in the warpgate with a bag of mushrooms in me just staring at the jump pads.  Seems magical.


http://forums.station.sony.com/ps2/index.php?threads/physx-super-hd-1440p-ultra-supersampling.95304/