+- Be Right Back, Uninstalling (https://www.brbuninstalling.com)
+-- Forum: General Category (https://www.brbuninstalling.com/forumdisplay.php?fid=49)
+--- Forum: General Discussion (https://www.brbuninstalling.com/forumdisplay.php?fid=59)
+---- Forum: Cosplay & Conventions (https://www.brbuninstalling.com/forumdisplay.php?fid=62)
+---- Thread: k0ala's BLU Engineer cosplay (/showthread.php?tid=12862)
k0ala's BLU Engineer cosplay - k0ala - 08-27-2011
August 27:
Starting the cosplay journal.
Today I went to WeirdStuff.
I got some thick yellow cables, and an old adding machine.
This is going with the vintage calculators that I got off of eBay last week.
THINGS TO ACQUIRE AND BUILD:
- wrench
- PDA (in progress)
- long yellow wire (parts)
- overalls
- right hand glove
- hard hat (complete; need to break the suspension so it tilts the right way)
- goggles
- tool belt
- ammo pouch
- "Teddy Roosebelt" style koala plush
- knee pads
- boots
PICTURE GALLERY (thanks HeK):
http://www.brbuninstalling.com/gallery/index.php/BRBU-Member-Galleries/k0ala
Re: k0ala's BLU Engineer cosplay - The Generic Name - 08-27-2011
well don't this beat all
Re: k0ala's BLU Engineer cosplay - CaffeinePowered - 08-27-2011
You need a small Koala plush dressed as an engineer
Re: k0ala's BLU Engineer cosplay - maxthroatkick - 08-27-2011
(08-27-2011, 07:05 PM)k0ala link Wrote:
- gloves
Gloves? I would think it would be just one. Dunno if this is just a typo or what youre actually planning. Will be interesting to see the whole thing, though
Re: k0ala's BLU Engineer cosplay - k0ala - 08-28-2011
can't buy one... or can i
Re: k0ala's BLU Engineer cosplay - at0m - 08-28-2011
(08-27-2011, 07:45 PM)Caffeine link Wrote: You need a small Koala plush dressed as an engineerthis, all day long
Re: k0ala's BLU Engineer cosplay - k0ala - 08-28-2011
8/28:
Good start to the day. Bacon and coffee.
Off to Harbor Freight in the next couple of days, to get a cheap rotary carving tool to hollow out the PDA, and some 2-part epoxy putty to make sure parts stay where I want them to.
Spoiler Alert: I already own a cowboy hat IRL.
(08-28-2011, 12:05 PM)at0m link Wrote: [quote author=Caffeine link=topic=5892.msg220601#msg220601 date=1314492325]this, all day long
You need a small Koala plush dressed as an engineer
[/quote]
Added to list in OP.
Re: k0ala's BLU Engineer cosplay - at0m - 08-28-2011
(08-28-2011, 12:27 PM)k0ala link Wrote: 8/28:this, all day long
Good start to the day. Bacon and coffee.
Off to Harbor Freight in the next couple of days, to get a cheap rotary carving tool to hollow out the PDA, and some 2-part epoxy putty to make sure parts stay where I want them to.
Spoiler Alert: I already own a cowboy hat IRL.
[quote author=at0m link=topic=5892.msg220649#msg220649 date=1314551109]
[quote author=Caffeine link=topic=5892.msg220601#msg220601 date=1314492325]
You need a small Koala plush dressed as an engineer
[/quote]
Added to list in OP.
[/quote]You know how awesome what we're talking about would be, right?
Re: k0ala's BLU Engineer cosplay - k0ala - 08-28-2011
(08-28-2011, 12:51 PM)at0m link Wrote: [quote author=k0ala link=topic=5892.msg220652#msg220652 date=1314552455]this, all day long
[quote author=at0m link=topic=5892.msg220649#msg220649 date=1314551109]
[quote author=Caffeine link=topic=5892.msg220601#msg220601 date=1314492325]
You need a small Koala plush dressed as an engineer
[/quote]Added to list in OP.
[/quote]You know how awesome what we're talking about would be, right?
[/quote]Yup. I'm aware. I'll be procuring a large ammo pouch sooner rather than later, so we can make sure we get a plush that fits.
Re: k0ala's BLU Engineer cosplay - CaffeinePowered - 08-28-2011
Well the two solutions are to either buy a koala plush and modify it or make the whole thing from scratch...dunno...making clothes and a mod would probably be easier...
Re: k0ala's BLU Engineer cosplay - matter11 - 08-28-2011
(08-28-2011, 05:36 PM)Caffeine link Wrote: buy a koala plush and modify it or make the whole thing from scratch
or you could get caff to make it
Re: Re: Re: k0ala's BLU Engineer cosplay - at0m - 08-28-2011
(08-28-2011, 05:54 PM)matter11 link Wrote: [quote author=Caffeine link=topic=5892.msg220678#msg220678 date=1314570964]
buy a koala plush and modify it or make the whole thing from scratch
or you could get caff to make it
[/quote]If caff thought he could make it (time/skills/etc), he wouldve volunteered himself, I would think.
Re: k0ala's BLU Engineer cosplay - maxthroatkick - 08-28-2011
(08-28-2011, 12:50 AM)k0ala link Wrote: can't buy one... or can i
Go to Korea apparently. Rubber Glove Story
But it might be smarter to just buy a pair in your own country and just save the left handed one for a pyro cosplay.
Re: k0ala's BLU Engineer cosplay - k0ala - 08-28-2011
I'm going to take out all the circuit boards and buttons from the Datakeeper, and hollow it out inside, just gluing the outside shells of the memory modules into place.
Re: k0ala's BLU Engineer cosplay - k0ala - 08-29-2011
![[Image: PDA1.jpg]](http://www.brbuninstalling.com/gallery/var/albums/BRBU-Member-Galleries/k0ala/PDA1.jpg)
8/29/2011:
Slow going, all the grinding implements are liquifying the plastic "sawdust" which then re-adheres to the cut edges. Datakeeper PDA is in pieces with the front keypad area cut out.
Rotary tool battery recharging.
I was going to make it a 4x4 keypad but the shell won't hold it.
The game's PDA is only 3x3 so I'll just use the 1-9 number keys as my base.
The spring action requires there to be a backing plate so I'll cut the keypad out and grind a random piece of circuit board to fit, and glue those bad boys together.
Re: k0ala's BLU Engineer cosplay - at0m - 08-29-2011
(08-29-2011, 01:03 PM)k0ala link Wrote: 8-29:Turn your speed down if the plastic is melting, and take more frequent 'breaks' from actively grinding to let the part cool.
Slow going, all the grinding implements are liquifying the plastic "sawdust" which then re-adheres to the cut edges. Datakeeper PDA is in pieces with the front keypad area cut out.
Rotary tool battery recharging.
Alternately, submerge it in something, but that's probably not a good idea for your grinder.
Re: k0ala's BLU Engineer cosplay - Kirby - 08-30-2011
(08-29-2011, 01:13 PM)at0m link Wrote: [quote author=k0ala link=topic=5892.msg220759#msg220759 date=1314641030]Turn your speed down if the plastic is melting, and take more frequent 'breaks' from actively grinding to let the part cool.
8-29:
Slow going, all the grinding implements are liquifying the plastic "sawdust" which then re-adheres to the cut edges. Datakeeper PDA is in pieces with the front keypad area cut out.
Rotary tool battery recharging.
Alternately, submerge it in something, but that's probably not a good idea for your grinder.
[/quote]
That melted slag is very easy to slice off with a good x-acto blade.
Re: k0ala's BLU Engineer cosplay - k0ala - 08-30-2011
Went to Harbor Freight again, got a set of hacksaws.
Discussing gloves on IRC; best to have a functioning right hand rather than a large toony glove.
Links for possible purchases:
Belt: http://www.amazon.com/Klein-5201-Lightweight-Tool-Belt/dp/B000UWBFRU
Knee Pads: http://www.amazon.com/Black-Multi-Purpose-Tactical-SWAT-Knee/dp/B002YJQA1S
Re: k0ala's BLU Engineer cosplay - k0ala - 09-08-2011
I'm planning another dremel day today. I epoxied the old EPROM cartridges into place, because their shells need to be part of the outside, and I'm grinding away the bits that held them in.
Re: k0ala's BLU Engineer cosplay - k0ala - 09-22-2011
Sorry, behind on posting. The 9-key section of adding machine board has been ground down till it fits inside the PDA shell. (May as well start calling it the Build Tool now.)
I've got the roommate's light box out and am making drawings from the screenshots I took. We're going to her sewing studio tomorrow.
I have 3 pairs of old baggy jeans about the same color, and one pair of Dickies overalls* to use as a pattern (and a source for rivets, eyes, and buckles).
Tomorrow I will have some pictures. I'd better charge up the old camera so I'm not obliged to use my cell phone.
*Why not wear those overalls? They're too small, wrong shade of blue, and, like every other pair of commercial denim overalls, sewn with WHITE thread. This is not good enough. I want it to photograph somewhat like it looks in the game, with dark seams, so we are going to use some orange thread.
EDIT: Shit happened. Postponed.